Skip Headers
Oracle® Database Quick Installation Guide
11g Release 2 (11.2) for Linux x86-64

Part Number E16768-06
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Master Index
Master Index
Go to Feedback page
Contact Us

  PDF · Mobi · ePub

Oracle® Database

Quick Installation Guide

11g Release 2 (11.2) for Linux x86-64

E16768-06

June 2011

This guide describes how to quickly install Oracle Database 11g Release 2 (11.2) on Linux x86-64 systems. It includes information about the following:

1 Reviewing Information About This Guide

This guide describes how to install Oracle Database by using the default installation options.

Tasks Described in This Guide

The procedures in this guide describe how to:

Results of a Successful Installation

After you successfully install Oracle Database:

Tasks Not Described in This Guide

This guide covers the Typical Installation scenario and does not describe how to complete the following tasks:

Where to Get Additional Installation Information

For more information about installing Oracle Database, including information about the tasks not described in this guide, refer to one of the following guides:

All these guides are available on the product disc. To access them, use a Web browser to open the welcome.htm file located in the top-level directory of the media. Platform-specific documentation is available in PDF and HTML formats in the Documentation section..

2 Logging In to the System as root

Before you install the Oracle software, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

Note:

You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed

3 Checking the Hardware Requirements

The system must meet the following minimum hardware requirements:

3.1 Memory Requirements

The following are the memory requirements for installing Oracle Database 11g Release 2 (11.2):

  • Minimum: 1 GB of RAM

    Recommended: 2 GB of RAM or more

    To determine the RAM size, enter the following command:

    # grep MemTotal /proc/meminfo
    

    If the size of the RAM is less than the required size, then you must install more memory before continuing.

  • The following table describes the relationship between installed RAM and the configured swap space recommendation:

    Note:

    On Linux, the HugePages feature allocates non-swappable memory for large page tables using memory-mapped files. If you enable HugePages, then you should deduct the memory allocated to HugePages from the available RAM before calculating swap space.
    Available RAM Swap Space Required
    Between 1 GB and 2 GB 1.5 times the size of the RAM
    Between 2 GB and 16 GB Equal to the size of the RAM
    More than 16 GB 16 GB

  • To determine whether the system architecture can run the software, enter the following command:

    # uname -m
    

    Note:

    This command displays the processor type. Verify that the processor architecture matches the Oracle software release that you want to install. If you do not see the expected output, then you cannot install the software on this system.

To determine the size of the configured swap space, enter the following command:

# grep SwapTotal /proc/meminfo

If necessary, refer to the operating system documentation for information about how to configure additional swap space.

To determine the available RAM and swap space, enter the following command:

# free

IMPORTANT:

  • Oracle recommends that you take multiple values for the available RAM and swap space before finalizing a value. This is because the available RAM and swap space keep changing depending on the user interactions with the computer.

  • Contact your operating system vendor for swap space allocation guidance for your server. The vendor guidelines supersede the swap space requirements listed in this guide.

Automatic Memory Management

Starting with Oracle Database 11g, the Automatic Memory Management feature requires more shared memory (/dev/shm)and file descriptors. The shared memory should be sized to be at least the greater of MEMORY_MAX_TARGET and MEMORY_TARGET for each Oracle instance on that computer.

To determine the amount of shared memory available, enter the following command:

# df -h /dev/shm/

Note:

MEMORY_MAX_TARGET and MEMORY_TARGET cannot be used when LOCK_SGA is enabled or with HugePages on Linux.

3.2 System Architecture

To determine whether the system architecture can run the software, enter the following command:

# uname -m

Note:

This command displays the processor type. Verify that the processor architecture matches the Oracle software release that you want to install. If you do not see the expected output, then you cannot install the software on this system.

3.3 Disk Space Requirements

The following are the disk space requirements for installing Oracle Database 11g Release 2 (11.2):

  • At least 1 GB of disk space in the /tmp directory

    To determine the amount of disk space available in the /tmp directory, enter the following command:

    # df -h /tmp
    

    If there is less than 1 GB of free disk space available in the /tmp directory, then complete one of the following steps:

    • Delete unnecessary files from the /tmp directory to meet the disk space requirement.

    • Set the TMP and TMPDIR environment variables when setting the oracle user's environment.

      See Also:

      "Configuring the oracle User's Environment" for more information about setting TMP and TMPDIR
    • Extend the file system that contains the /tmp directory. If necessary, contact the system administrator for information about extending file systems.

  • To determine the amount of free disk space on the system, enter the following command:

    # df -h
    
  • The following tables describe the disk space requirements for software files, and data files for each installation type on Linux x86-64:

    Installation Type Requirement for Software Files (GB)
    Enterprise Edition 4.35
    Standard Edition 3.73

    Installation Type Requirement for Data Files (GB)
    Enterprise Edition 1.68
    Standard Edition 1.48

    Additional disk space, either on a file system or on an Oracle Automatic Storage Management disk group is required for the fast recovery area if you choose to configure automated backups.

4 Checking the Software Requirements

Depending on the products that you intend to install, verify that the following softwares are installed on the system.

Note:

Oracle Universal Installer performs checks on the system to verify that it meets the listed requirements. To ensure that these checks pass, verify the requirements before you start Oracle Universal Installer.

4.1 Operating System Requirements

The following or later versions of the operating system are required for Oracle Database 11g Release 2 (11.2):

  • Asianux Server 3 SP2

  • Oracle Linux 4 Update 7

  • Oracle Linux 5 Update 2

  • Oracle Linux 5 Update 5 (only if using Oracle Unbreakable Enterprise Kernel)

  • Red Hat Enterprise Linux 4 Update 7

  • Red Hat Enterprise Linux 5 Update 2

  • Red Hat Enterprise Linux 5 Update 5 (only if using Oracle Unbreakable Enterprise Kernel)

  • SUSE Linux Enterprise Server 10 SP2

  • SUSE Linux Enterprise Server 11

Starting with Oracle Database 11g Release 2 (11.2), the Security Enhanced Linux (SE Linux) feature is supported for Oracle Linux 4, Red Hat Enterprise Linux 4, Oracle Linux 5, and Red Hat Enterprise Linux 5.

Note:

For Asianux Server, Oracle Linux, and Red Hat Enterprise Linux, system requirements are identical by kernel version. Specifically:
  • Oracle Linux 4 and Red Hat Enterprise Linux 4 requirements are the same.

  • Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5 requirements are the same.

  • Oracle Unbreakable Enterprise Kernel for Linux 5 Update 5 (2.6.32), available for x86-64 systems, contains several additional features and performance enhancements not available either with Oracle Linux or with other supported Linux distributions. This kernel can be installed on either Oracle Linux or Red Hat Enterprise Linux distributions. Before installing the Unbreakable Enterprise Kernel, you must have Oracle Linux 5 Update 5 or RHEL5 Update 5 installed on an x86-64 server.

To determine the distribution and version of Linux installed, enter the following command:

# cat /proc/version

Note:

Only the distributions and versions listed in the earlier list are supported. Do not install the software on other versions of Linux.

4.2 Kernel Requirements

The following are the kernel requirements for Oracle Database 11g Release 2 (11.2):

To determine whether the required kernel is installed, enter the following command:

# uname -r

The following is a sample output displayed by running this command on an Oracle Linux 5.0 system:

2.6.18-128.el5PAE

In this example, the output shows the kernel version (2.6.18) and errata level (-128.el5PAE) on the system.

If the kernel version does not meet the requirement specified earlier in this section, then contact the operating system vendor for information about obtaining and installing kernel updates.

4.3 Package Requirements

The following are the list of packages required for Oracle Database 11g Release 2 (11.2):

Note:

  • Oracle recommends that you install your Linux operating system with the default software packages (RPMs), unless you specifically intend to perform a minimal installation, and follow the directions for performing such an installation to ensure that you have all required packages for Oracle software.

  • Oracle recommends that you do not customize RPMs during a default operating system installation. A default installation includes most required packages, and will help you to limit manual checks of package dependencies.

  • If you did not perform a default Linux installation, you intend to use LDAP, and you want to use the scripts odisrvreg, oidca, or schemasync, then install the Korn shell RPM for your Linux distribution.

  • You must install the packages (or later versions) listed in the following table. Also, ensure that the list of RPMs and all the prerequisites for these RPMs are installed.

  • If you are using Oracle Unbreakable Enterprise Kernel, then all required kernel packages are installed as part of the Oracle Unbreakable Enterprise Kernel installation.

IMPORTANT:

Starting with Oracle Database 11g Release 2 (11.2.0.2), all the 32-bit packages, except for gcc-32bit-4.3, listed in the following table are no longer required for installing a database on Linux x86-64. Only the 64-bit packages are required.

However, for any Oracle Database 11g release prior to 11.2.0.2, both the 32-bit and 64-bit packages listed in the following table are required.

  • The following or later version of packages for Oracle Linux 4 and Red Hat Enterprise Linux 4 should be installed:

    binutils-2.15.92.0.2
    compat-libstdc++-33-3.2.3
    compat-libstdc++-33-3.2.3 (32 bit)
    elfutils-libelf-0.97
    elfutils-libelf-devel-0.97
    expat-1.95.7
    gcc-3.4.6
    gcc-c++-3.4.6
    glibc-2.3.4-2.41
    glibc-2.3.4-2.41 (32 bit)
    glibc-common-2.3.4
    glibc-devel-2.3.4
    glibc-headers-2.3.4
    libaio-0.3.105
    libaio-0.3.105 (32 bit)
    libaio-devel-0.3.105
    libaio-devel-0.3.105 (32 bit)
    libgcc-3.4.6
    libgcc-3.4.6 (32-bit)
    libstdc++-3.4.6
    libstdc++-3.4.6 (32 bit)
    libstdc++-devel 3.4.6
    make-3.80
    numactl-0.6.4.x86_64
    pdksh-5.2.14
    sysstat-5.0.5
    
  • The following or later version of packages for Asianux 3, Oracle Linux 5, and Red Hat Enterprise Linux 5 should be installed:

    binutils-2.17.50.0.6
    compat-libstdc++-33-3.2.3
    compat-libstdc++-33-3.2.3 (32 bit)
    elfutils-libelf-0.125
    elfutils-libelf-devel-0.125
    gcc-4.1.2
    gcc-c++-4.1.2
    glibc-2.5-24
    glibc-2.5-24 (32 bit)
    glibc-common-2.5
    glibc-devel-2.5
    glibc-devel-2.5 (32 bit)
    glibc-headers-2.5
    ksh-20060214
    libaio-0.3.106
    libaio-0.3.106 (32 bit)
    libaio-devel-0.3.106
    libaio-devel-0.3.106 (32 bit)
    libgcc-4.1.2
    libgcc-4.1.2 (32 bit)
    libstdc++-4.1.2
    libstdc++-4.1.2 (32 bit)
    libstdc++-devel 4.1.2
    make-3.81
    numactl-devel-0.9.8.x86_64
    sysstat-7.0.2
    
  • The following or later version of packages for SUSE Linux Enterprise Server 10 should be installed:

    binutils-2.16.91.0.5
    compat-libstdc++-5.0.7
    gcc-4.1.0
    gcc-c++-4.1.2
    glibc-2.4-31.63
    glibc-devel-2.4-31.63
    glibc-devel-32bit-2.4-31.63
    ksh-93r-12.9
    libaio-0.3.104
    libaio-32bit-0.3.104
    libaio-devel-0.3.104
    libaio-devel-32bit-0.3.104
    libelf-0.8.5
    libgcc-4.1.2
    libstdc++-4.1.2
    libstdc++-devel-4.1.2
    make-3.80
    numactl-0.9.6.x86_64
    sysstat-8.0.4
    
  • The following or later version of packages for SUSE Linux Enterprise Server 11 should be installed:

    binutils-2.19
    gcc-4.3
    gcc-32bit-4.3
    gcc-c++-4.3
    glibc-2.9
    glibc-32bit-2.9
    glibc-devel-2.9
    glibc-devel-32bit-2.9
    ksh-93t
    libaio-0.3.104
    libaio-32bit-0.3.104
    libaio-devel-0.3.104
    libaio-devel-32bit-0.3.104
    libstdc++33-3.3.3
    libstdc++33-32bit-3.3.3
    libstdc++43-4.3.3_20081022
    libstdc++43-32bit-4.3.3_20081022
    libstdc++43-devel-4.3.3_20081022
    libstdc++43-devel-32bit-4.3.3_20081022
    libgcc43-4.3.3_20081022
    libstdc++-devel-4.3
    make-3.81
    sysstat-8.1.5
    

To determine whether the required packages are installed, enter commands similar to the following:

# rpm -q package_name

If a package is not installed, then install it from the Linux distribution media or download the required package version from the Linux vendor's Web site.

4.4 Compiler Requirements

Intel C++ Compiler 10.1 or later and the version of GNU C and C++ compilers listed under "Package Requirements" are supported with these products.

Note:

Intel Compiler v10.1 can be used only with the standard template libraries of the gcc versions mentioned in the Package Requirements section, to build Oracle C++ Call Interface (OCCI) applications.

Oracle XML Developer's Kit is supported with the same compilers as OCCI.

4.5 Additional Software Requirements

Depending on the components you want to use, you must ensure that the following software are installed:

4.5.1 Oracle ODBC Drivers

You should install ODBC Driver Manager for UNIX. You can download and install the Driver Manager from the following URL:

http://www.unixodbc.org

To use ODBC, you must also install the following additional ODBC RPMs, depending on your operating sytem:

  • On Oracle Linux 4 and Red Hat Enterprise Linux 4:

    • unixODBC-2.2.11 (32-bit) or later

    • unixODBC-devel-2.2.11 (64-bit) or later

    • unixODBC-2.2.11 (64-bit) or later

  • On Asianux Server 3, Oracle Linux 5, and Red Hat Enterprise Linux 5:

    • unixODBC-2.2.11 (32-bit) or later

    • unixODBC-devel-2.2.11 (64-bit) or later

    • unixODBC-2.2.11 (64-bit) or later

  • On SUSE 10:

    • unixODBC-32 bit-2.2.11 (32-bit) or later

    • unixODBC-2.2.11 (64-bit) or later

    • unixODBC-devel-2.2.11 (64-bit) or later

  • On SUSE 11:

    • unixODBC-2.2.12 or later

    • unixODBC-devel-2.2.12 or later

    • unixODBC-32bit-2.2.12 (32-bit) or later

4.5.2 Oracle JDBC/OCI Drivers

Use JDK 6 (Java SE Development Kit 1.6.0_21) or JDK 5 (1.5.0_24) with the JNDI extension with the Oracle Java Database Connectivity and Oracle Call Interface drivers. However, these are not mandatory for the database installation. Note that IBM JDK 1.5 is installed with this release.

4.5.3 Linux-PAM Library

Install the latest Linux-PAM (Pluggable Authentication Modules for Linux) library to enable the system administrator to choose how applications authenticate users.

4.5.4 Oracle Messaging Gateway

Oracle Messaging Gateway supports the integration of Oracle Streams Advanced Queuing (AQ) with the following software:

  • IBM WebSphere MQ V6.0, client and server, with corrective service diskette 5 (CSD05) or later:

    MQSeriesClient
    MQSeriesServer
    MQSeriesRuntime
    
  • TIBCO Rendezvous 7.3

If you require a CSD for WebSphere MQ, then refer to the following Web site for download and installation information:

http://www-947.ibm.com/support/entry/portal/Downloads/Software/WebSphere/WebSphere_MQ

4.5.5 Programming Languages

The following products are certified for use with:

  • Pro* COBOL

    Micro Focus Server Express 5.1

4.5.6 Browser Requirements

Web browsers must support Java Script, and the HTML 4.0 and CSS 1.0 standards. The following Web browsers are supported for Oracle Enterprise Manager Database Control:

  • Netscape Navigator 8.1

  • Netscape Navigator 9.0

  • Microsoft Internet Explorer 6.0 SP2

  • Microsoft Internet Explorer 7.0 SP1

  • Microsoft Internet Explorer 8.0

  • Firefox 2.0

  • Firefox 3.0.7

  • Firefox 3.5

  • Firefox 3.6

  • Safari 3.0.4

  • Safari 3.1

  • Safari 3.2

  • Safari 4.0.x

  • Google Chrome 3.0

  • Google Chrome 4.0

5 Creating Required Operating System Groups and Users

The following local operating system groups and users are required if you are installing Oracle Database:

To determine whether these groups and users already exist, and if necessary, to create them, follow these steps:

  1. To determine whether the oinstall group exists, enter the following command:

    # more /etc/oraInst.loc
    

    If the output of this command shows the oinstall group name, then the group already exists.

    If the oraInst.loc file exists, then the output from this command is similar to the following:

    inventory_loc=/u01/app/oraInventory
    inst_group=oinstall
    

    The inst_group parameter shows the name of the Oracle Inventory group, oinstall.

  2. To determine whether the dba group exists, enter the following command:

    # grep dba /etc/group
    

    If the output from this commands shows the dba group name, then the group already exists.

  3. If necessary, enter the following commands to create the oinstall and dba groups:

    # /usr/sbin/groupadd oinstall
    # /usr/sbin/groupadd dba
    
  4. To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

    # id oracle
    

    If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group and dba is a secondary group:

    uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
    
  5. If necessary, complete one of the following actions:

    • If the oracle user exists, but its primary group is not oinstall or it is not a member of the dba group, then enter the following command:

      # /usr/sbin/usermod -g oinstall -G dba oracle
      
    • If the oracle user does not exist, enter the following command to create it:

      # /usr/sbin/useradd -g oinstall -G dba oracle
      

      This command creates the oracle user and specifies oinstall as the primary group and dba as the secondary group.

  6. Enter the following command to set the password of the oracle user:

    # passwd oracle
    

6 Configuring Kernel Parameters

Verify that the kernel parameters shown in the following table are set to values greater than or equal to the minimum value shown. The procedure following the table describes how to verify and set the values.

Note:

The kernel parameter and shell limit values in this section are minimum values only. For production database systems, Oracle recommends that you tune these values to optimize the performance of the system. Refer to your operating system documentation for more information about tuning kernel parameters.
Parameter Minimum Value File
semmsl

semmns

semopm

semmni

250

32000

100

128

/proc/sys/kernel/sem
shmall 2097152 /proc/sys/kernel/shmall
shmmax A maximum value of half the size of physical memory (in bytes).

Default: 536870912

See My Oracle Support Note 567506.1 for additional information about configuring shmmax.

/proc/sys/kernel/shmmax
shmmni 4096 /proc/sys/kernel/shmmni
file-max 6815744 /proc/sys/fs/file-max
ip_local_port_range Minimum: 9000

Maximum: 65500

/proc/sys/net/ipv4/ip_local_port_range
rmem_default 262144 /proc/sys/net/core/rmem_default
rmem_max 4194304 /proc/sys/net/core/rmem_max
wmem_default 262144 /proc/sys/net/core/wmem_default
wmem_max 1048576 /proc/sys/net/core/wmem_max
aio-max-nr Maximum: 1048576

Note: This value limits concurrent outstanding requests and should be set to avoid I/O subsystem failures.

/proc/sys/fs/aio-max-nr

Note:

If the current value of any parameter is higher than the value listed in this table, then do not change the value of that parameter.

To view the current value specified for these kernel parameters, and to change them if necessary:

Check Resource Limits for the Oracle Software Installation Users

For each installation software owner, check the resource limits for installation, using the following recommended ranges:

Table 1 Installation Owner Resource Limit Recommended Ranges

Resource Shell Limit Resource Soft Limit Hard Limit

Open file descriptors

nofile

at least 1024

at least 65536

Number of processes available to a single user

nproc

at least 2047

at least 16384

Size of the stack segment of the process

stack

at least 10240 KB

at least 10240 KB, and at most 32768 KB


To check resource limits:

  1. Log in as an installation owner.

  2. Check the soft and hard limits for the file descriptor setting. Ensure that the result is in the recommended range. For example:

    $ ulimit -Sn
    4096
    $ ulimit -Hn
    65536
    
  3. Check the soft and hard limits for the number of processes available to a user. Ensure that the result is in the recommended range. For example:

    $ ulimit -Su
    2047
    $ ulimit -Hu
    16384
    
    
  4. Check the soft limit for the stack setting. Ensure that the result is in the recommended range. For example:

    $ ulimit -Ss
    10240
    $ ulimit -Hs
    32768
    
  5. Repeat this procedure for each Oracle software installation owner.

If necessary, update the resource limits in the /etc/security/limits.conf configuration file for the installation owner. For example, add the following lines to the /etc/security/limits.conf file:

oracle              soft    nproc   2047
oracle              hard    nproc   16384
oracle              soft    nofile  1024
oracle              hard    nofile  65536
oracle              soft    stack   10240

Note:

  • The values mentioned in this example are illustrative and not actual values that need to be added.

  • When the limits.conf file is changed, these changes take effect immediately. However, if the grid or oracle users are logged in, then these changes will not take effect until you log these users out and log them back in. You must do this before you attempt to use these accounts to install.

7 Creating Required Directories

Create directories with names similar to the following, and specify the correct owner, group, and permissions for them:

The Oracle base directory must have 3 GB of free disk space, or 4 GB of free disk space if you choose not to create a separate Oracle data file directory.

Note:

If you do not want to create a separate Oracle data file directory, then you can install the data files in a subdirectory of the Oracle base directory. However, this is not recommended for production databases.

To create the Oracle base directory:

  1. Enter the following command to display information about all mounted file systems:

    # df -k
    

    This command displays information about all the file systems mounted on the system, including:

    • The physical device name

    • The total amount, used amount, and available amount of disk space

    • The mount point directory for that file system

  2. From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.

  3. Note the name of the mount point directory for each file system that you identified.

  4. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

    # mkdir -p /mount_point/app/
    # chown -R oracle:oinstall /mount_point/app/
    # chmod -R 775 /mount_point/app/
    

    For example:

    # mkdir -p /u01/app/
    # chown -R oracle:oinstall /u01/app/
    # chmod -R 775 /u01/app/
    

8 Configuring the oracle User's Environment

You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

To set the oracle user's environment:

  1. Start a new terminal session, for example, an X terminal (xterm).

  2. Enter the following command to ensure that X Window applications can display on this system:

    $ xhost fully_qualified_remote_host_name
    

    For example:

    $ xhost somehost.us.example.com
    
  3. If you are not already logged in to the system where you want to install the software, then log in to that system as the oracle user.

  4. If you are not logged in as the oracle user, then switch user to oracle:

    $ su - oracle
    
  5. To determine the default shell for the oracle user, enter the following command:

    $ echo $SHELL
    
  6. To run the shell startup script, enter one of the following commands:

    • Bash shell:

      $ . ./.bash_profile
      
    • Bourne or Korn shell:

      $ . ./.profile
      
    • C shell:

      % source ./.login
      
  7. If you are not installing the software on the local computer, then run the following command on the remote machine to set the DISPLAY variable:

    • Bourne, Bash or Korn shell:

      $ export DISPLAY=local_host:0.0      
      
    • C shell:

      % setenv DISPLAY local_host:0.0
      

    In this example, local_host is the host name or IP address of the local computer that you want to use to display Oracle Universal Installer.

    Run the following command on the remote machine to check if the shell and the DISPLAY environmental variable are set correctly:

    echo $SHELL
    echo $DISPLAY
    

    Now to enable X applications, run the following commands on the local computer:

    $ xhost + fully_qualified_remote_host_name
    

    To verify that X applications display is set properly, run a X11 based program that comes with the operating system such as xclock:

    $ xclock
    

    In this example, you can find xclock at /usr/X11R6/bin/xclocks. If the DISPLAY variable is set properly, then you can see xclock on your computer screen.

    See Also:

    PC-X Server or operating system vendor documents for further assistance
  8. If you determined that the /tmp directory has less than 1 GB of free disk space, then identify a file system with at least 1 GB of free space and set the TMP and TMPDIR environment variables to specify a temporary directory on this file system:

    1. To determine the free disk space on each mounted file system use the following command:

      # df -h /tmp
      
    2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

      $ sudo mkdir /mount_point/tmp
      $ sudo chmod a+wr /mount_point/tmp
      # exit
      
    3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:

      • Bourne, Bash, or Korn shell:

        $ TMP=/mount_point/tmp
        $ TMPDIR=/mount_point/tmp
        $ export TMP TMPDIR
        
      • C shell:

        % setenv TMP /mount_point/tmp
        % setenv TMPDIR /mount_point/tmp
        
  9. Enter commands similar to the following to set the ORACLE_BASE and ORACLE_SID environment variables:

    • Bourne, Bash, or Korn shell:

      $ ORACLE_BASE=/u01/app/oracle
      $ ORACLE_SID=sales
      $ export ORACLE_BASE ORACLE_SID
      
    • C shell:

      % setenv ORACLE_BASE /u01/app/oracle
      % setenv ORACLE_SID sales
      

    In this example, /u01/app/oracle is the Oracle base directory that you created or identified earlier and sales is the name that you want to call the database (typically no more than five characters).

  10. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

    • Bourne, Bash, or Korn shell:

      $ unset ORACLE_HOME
      $ unset TNS_ADMIN
      
    • C shell:

      % unsetenv ORACLE_HOME
      % unsetenv TNS_ADMIN
      

    Note:

    If the ORACLE_HOME environment variable is set, then Oracle Universal Installer uses the value that it specifies as the default path for the Oracle home directory. However, if you set the ORACLE_BASE environment variable, then Oracle recommends that you unset the ORACLE_HOME environment variable and choose the default path suggested by Oracle Universal Installer.

9 Mounting the Product Disc

On most Linux systems, the disk mounts automatically when you insert it into the installation media. If the disk does not mount automatically, then follow these steps to mount it:

  1. Enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:

    • Asianux, Oracle Linux, and Red Hat Enterprise Linux:

      $ sudo eject /mnt/dvd
      
    • SUSE Linux Enterprise Server:

      # eject /media/dvd
      

    In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

  2. Insert the DVD into the disc drive.

  3. To verify that the disc mounted automatically, enter a command similar to the following:

    • Asianux, Oracle Linux, and Red Hat Enterprise Linux:

      # ls /mnt/dvd
      
    • SUSE Linux Enterprise Server:

      # ls /media/dvd
      
  4. If this command fails to display the contents of the disc, then enter a command similar to the following:

    • Asianux, Oracle Linux, and Red Hat Enterprise Linux:

      # mount -t iso9660 /dev/dvd /mnt/dvd
      
    • SUSE Linux Enterprise Server:

      # mount -t iso9660 /dev/dvd /media/dvd
      

    In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

10 Installing Oracle Database

After configuring the oracle user's environment, start Oracle Universal Installer and install Oracle Database as follows:

  1. To start Oracle Universal Installer, enter the following command:

    $ /mount_point/db/runInstaller
    

    If Oracle Universal Installer does not start, then refer to Oracle Database Installation Guide for Linux for information about how to troubleshoot X Window display problems.

  2. The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

    • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

    • If you encounter errors while installing or linking the software, then refer to Oracle Database Installation Guide for Linux for information about troubleshooting.

    Note:

    If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.
    Screen Recommended Action
    Configure Security Updates Enter your e-mail address, preferably your My Oracle Support (formerly OracleMetaLink) e-mail address or user name in the Email field.

    You can select the I wish to receive security updates via My Oracle Support check box to receive security updates.

    Enter your My Oracle Support password in the My Oracle Support Password field.

    Click Next.

    Download Software Updates Starting with Oracle Database 11g Release 2 (11.2.0.2), you can use the Software Updates feature to dynamically download and apply latest updates. Select one of the following options and click Next:
    • Use My Oracle Support credentials for download: Select this option to download and apply the latest software updates.

      Click Proxy Settings to configure a proxy for Oracle Universal Installer to use to connect to the Internet. Provide the proxy server information for your site, along with a user account that has access to the local area network through which the server is connecting.

      Click Test Connection to ensure that your proxy settings are correctly entered, and the installer can download the updates.

    • Use pre-downloaded software updates: Select this option to apply previously downloaded software updates.

    • Skip Software Updates: Select this option if you do not want to apply any updates.

    Apply Software Updates This screen is displayed if you select to download the software updates or provide the pre-downloaded software downloads location.

    If you selected Use My Oracle Support credentials for download in the previous screen, select Download and apply all updates, and then click Next.

    If you selected Use pre-downloaded software updates in the previous screen, select Apply all updates, and then click Next.

    Select Installation Option Select Create and configure a database from the following list of available options, then click Next:
    • Create and configure a database

    • Install database software only

    • Upgrade an existing database

    System Class Select Server Class from the following options to install the database, and click Next.
    • Desktop Class: Choose this option if you are installing on a laptop or desktop class system.

    • Server Class: Choose this option if you are installing on a server class system, such as what you would use when deploying Oracle in a production data center.

    Grid Installation Options Select Single instance database installation for the type of database installation you want to perform, and click Next.
    • Single instance database installation: This option installs the database and the listener.

    • Real Application Clusters database installation: This option installs Oracle Real Application Clusters.

    • Oracle RAC One Node database installation: This option installs the Oracle RAC One Node database.

      Note: Oracle RAC One Node is supported only with Oracle Clusterware.

    Select Install Type Select Typical Install as the installation type from the following options, and click Next:
    • Typical Install: This installation method is selected by default. It lets you quickly install Oracle Database using minimal input.

    • Advanced Install: This installation method enables to perform more complex installations.

    Typical Install Configuration Enter the following information as per your requirements:

    Oracle base: The Oracle base path appears by default. You can change the path based on your requirement.

    Software location: In the Software Location section, accept the default value or enter the Oracle home directory path in which you want to install Oracle components. The directory path should not contain spaces.

    Storage Type: Select File System, or Oracle Automatic Storage Management as the database storage option.

    Database file location: If you select File System as your storage type, then click Browse and specify a database file location.

    ASMSNMP Password: If you select Oracle Automatic Storage Management as your Storage Type, then specify the password for the ASMSNMP user.

    Database edition: Select the database edition that you want to install.

    OSDBA Group: The OSDBA group is selected by default. You can also select the OSDBA group from the list.

    Global database name: Specify the Global Database Name using the following syntax:

    database_name.domain
    

    For example, sales.us.example.com

    Administrative password: Enter the password for the privileged database account.

    Confirm Password: Reenter, and confirm the password for the privileged database account.

    Click Next to continue.

    Create Inventory This screen is displayed only during the first installation of Oracle products on a system.

    Specify the full path of the Oracle Inventory directory. Ensure that the operating system group selected is oinstall. Click Next to continue.

    Perform Prerequisite Checks Verify that all the prerequisite checks succeed, and then click Next.

    Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all the preinstallation steps in this guide, all the checks should pass.

    If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.

    Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully.

    Summary Review the information displayed on this screen, and then click Install.

    Note: Starting with Oracle Database 11g Release 2 (11.2), you can save all the installation steps into a response file by clicking Save Response File. Later, this file can be used for a silent installation.

    Install Product This screen states the progress of a database installation. After the database is installed, you are prompted to execute some root configuration script for new inventory as the root user. Click Next.

    This screen then displays the status information for the configuration assistants that configure the software and create a database.

    Finally, a message is displayed at the end of Database Configuration Assistant process, and click OK.

    Execute the root.sh script as the root user to complete the installation and click OK.

    Finish This screen is shown automatically when all the configuration tools are successful.

    Click Close.


11 Installing Oracle Database Examples

If you plan to use the following products or features, then download and install the products from the Oracle Database Examples media:

For information about installing software and various Oracle product demonstrations from the Oracle Database Examples media, refer to Oracle Database Examples Installation Guide.

12 What to Do Next?

To become familiar with this release of Oracle Database, it is recommended that you complete the following tasks:

13 Additional Information

This section contains information about the following:

Product Licenses

You are welcome to install and evaluate the products included in this media pack for 30 days under the terms of the Trial License Agreement. However, you must purchase a program license if you want to continue using any product after the 30 day evaluation period. See the following section for information about purchasing program licenses.

Purchasing Licenses and Version Updates

You can purchase program licenses and updated versions of Oracle products from the Oracle Store Web site:

https://shop.oracle.com

Contacting Oracle Support Services

If you have purchased Oracle Product Support, you can call Oracle Support Services for assistance 24 hours a day, seven days a week. For information about purchasing Oracle Product Support or contacting Oracle Support Services, go to the Oracle Support Services Web site:

http://www.oracle.com/us/support/index.html

Locating Product Documentation

Product documentation includes information about configuring, using, or administering Oracle products on any platform. The product documentation for Oracle Database 11g products is available in both HTML and PDF formats in the following locations:

To view PDF documents, download the free Adobe Acrobat Reader from the Adobe Web site, if necessary:

http://www.adobe.com

14 Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.


Oracle Database Quick Installation Guide, 11g Release 2 (11.2) for Linux x86-64

E16768-06

Copyright © 1996, 2011, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.